Series 2400
2423 Powder Vacuum Receiver

PDF Download
2423 Receiver

  

The 2423 Powder Vacuum Receiver is designed to handle free flowing granular, powder, regrind and pelletized materials. It features a large filter area with automatic cleaning for fine powders. Each receiver has a stainless steel check valve to allow multiple receivers to draw material from a common conveying line.

  • Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact.
  • The 2423 powder receiver has a large filter cartridge with 50-square feet of spunbond polyester media. It is automatically cleaned with bursts of compressed air.
  • 60 degree hopper with 10-inch gravity discharge gate with white Neoprene seal.
  • Band clamps for quick body section separation.
  • 3-inch tangential inlet with stainless steel check valve.
  • 3-inch air control valve.
  • 22-inch diameter housing.
  • Ideal for conveying PVC compound.

Powder Mounting Ring Features

  • Carbon steel or 304 stainless steel construction, 24-in. high.
  • Flanged extension with 360° gate access by removing a 12 oz. P.T.F.E. filter cloth sleeve.
  • Flanged bolt pattern allows for receiver position in 26 degree increments.

For more information, contact Premier.

PDF Download
2423 Receiver

If you need the free Acrobat Reader, click here.

 

 


Controllers
Receivers are available with controls suitable for use with either a solid state microprocessor controller or a programmable logic controller. Both
control systems utilize 24 VDC low voltage and are available with installation kits making installation easy and more economical. The receiver controls
include color coded quick connectors and provide communication to the central controller:

  • I/O module receiver controls, for use with a programmable logic controller, provide all communication parameters to the central
    controller for operation. An optional receiver on/off selector is available for maintenance ease.
  • Solid state receiver controls, for use with a microprocessor controller, provide many commands to the central controller for operation. Receiver located functions include; the number of bag pulses, pulse rate, level sensor sensitivity, and receiver on/off selection.