Series 2400
2424 Vacuum Receiver

PDF Download

2424 Pellet Receiver

2424 Powder Receiver

  

The 2424 Powder and Pellet Vacuum Receivers provide a high capacity sequencing
system designed to handle powder, pellet, regrind and granular materials.
Recommended uses are for railcar unloading, silo-to-daybin transfer, or inplant transfer applications up to 15,000 pounds per hour.

The 2424 powder receiver has a large filter cartridge with 50-square feet of spunbond polyester filter media. It is automatically cleaned with bursts of compressed air.


The 2424 pellet receiver has a perforated stainless steel filter element.

Features

  • 4-inch air control valve.
  • 22-inch diameter housing.
  • 4-inch tangential inlet with stainless steel check valve.
  • Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact.
  • Band clamps for quick body section separation.
  • 60° hopper with 10-inch gravity discharge gate with white Neoprene seal.

For more information, contact Premier.

PDF Download
2424 Pellet Receiver

2424 Powder Receiver

If you need the free Acrobat Reader, click here.


Controllers
Receivers are available with controls suitable for use with either a solid state microprocessor controller or a programmable logic controller. Both control systems utilize 24 VDC low voltage and are available with installation kits making installation easy and more economical. The receiver controls include color coded quick connectors and provide
communication to the central controller:

  • I/O module receiver controls, for use with a programmable logic controller, provide all communication parameters to the central controller for operation. An optional receiver on/off selector is available for maintenance ease.
  • Solid state receiver controls, for use with a microprocessor controller, provide many commands to the central controller for operation. Receiver located functions include the number of bag pulses, pulse rate, level sensor sensitivity, and receiver on/off selection.

Mounting Ring Features

  • Carbon steel or 304 steel construction, 24-in. high.
  • Flanged extension with 360° gate
    access by removing a 12 oz. P.T.F.E. filter cloth sleeve.
  • Flanged bolt pattern allows for receiver position in 26 degree increments.