The Light-Duty Aerolock provides an excellent seal in low pressure or low vacuum service. Pressure differential across the Aerolock is limited to a maximum of 3 PSI, allowing the flexible tip rotor to keep air loss to an absolute minimum. It is ideally suited to continuous discharge from cyclone or filter type dust collectors where a head of material does not build up on top of the Aerolock inlet.

The Light-Duty Aerolock is often a choice for dust collection applications.

Features:

• Housing and end plates
  The housing and end plates are machined from castings and are made of wear iron, chrome-plated wear iron, or stainless steel and are available with either a round or square flange.

• Bearings
  Both ends of the shaft are supported by pre-lubricated, permanently sealed, radial ball bearings mounted in outboard configuration.

• Seals
  Double lip-style seals in each end plate prevent material leakage. T-3 seals are also available. The bearing area is outboard and vented.

• Rotors
  Flexible tips eliminate tolerance adjustments, and the rotors are easily replaced as they wear. They are ideal for use with fine powders and dusts commonly associated with cyclone.

For more information, contact Premier.

Light-Duty Aerolock

Performance Specifications

Aerolock Drive Information

PDF Download
Light-Duty Airlock Spec Sheet

If you need the free Acrobat Reader, click here.