Premier 'A’ Valves divert a material stream into one of two destinations, and are designed for gravity drop installations where no pressure differential exists across the inlet and outlet.

Note: The diverter gate cannot be actuated against a head of material.

Features

• Available in aluminum, carbon steel, or stainless steel
• Metal diverter gate has a tight polyurethane seal
• Available in sizes from 6 inches to 14 inches
• Round-flanged inlet/outlet adapters are available
• Enclosure ratings of NEMA 4X and NEMA 9 are standard, with NEMA 7 optional
• Magnetic proximity proof switch confirmation for both gate positions
• Double solenoids ensure positive gate actuation

Manual or Air Actuated
The A’ Valve’s material diverter gate may be actuated manually or with compressed air. The valve shown below features a manual actuator, which enables the system operator to divert material on demand. On the left, the automatic air actuator is featured.

For more information, contact Premier.

PDF Dimensional Downloads
'A' Valve Manual Operation
'A' Valve Air Activated

If you need the free Acrobat Reader, click here.