| Consisting of one to eight feeders and a central
microprocessor based controller, the ProRate/Gravimetric Feeder continuously
meters raw materials accurately into a central station hopper.
|
 |
|
| Hoppers cylindrically designed with a 60° cone to
assure fast material discharge. ProRate I/Gravimetric feeder designed
with selection of five interchangeable auger sizes, allowing for varying
capacities up to 1,175 pounds per hour. ProRate II/Gravimetric feeder
designed with 3-inch diameter auger providing high capacity feeding
up to 3,500 pounds per hour. High performance load cell assembly with
a nominal 12-inch base frame provides an accurate weigh signal to
the controller. Center station 4-station quad base (8-station base
also available) is designed for use with either the ProRate I/Gravimetric
feeders or high-volume ProRate II/Gravimetric feeders Modular scale
platform assemblies provide support by two legs, with adjustable leveling
bolts, and bolt-on attachment to the base station. Continuous loss-in-weight
controller is a multimode, microprocessor based, process weight controller.
|
|
| |
|
|
| Gravimetric Batch Blenders |
|
|
Available in 2.5KG, 5KG and 12KG sizes.
Each of the materials are dispensed sequentially
into a common weighing hopper in the desired proportions. The weighed
materials are then released into a separate mixing chamber which
provides the most consistent homogeneous blend of any batch type
blender.
|
|
 |
|
|
Features:
- Ingredient accuracy of +/- 0.02% per batch
at highest accuracy setting
- Integral loading platform for mounting
vacuum receivers
- Clean-out system to facilitate quick and
easy product changeovers
- Attached air hose and nozzle for cleaning
- Fast acting V-gate valve on each ingredient
hopper
- Support for a wide variety of communications
protocols
- Inventory of entire blender and each individual
hopper
|
|
For more information, contact
Premier.
PDF Download
 ProRate
Gravimetric Feeders
Gravimetric Blenders
If you need the free Acrobat Reader, click
here.
|
