Series3 2406 Vacuum Receivers
The Series3 Model 2406 vacuum receivers are ideal for applications when space is a premium and material volumes are minimal. Designed with the small part plastic molder in mind, the 2406 is suited for vacuum conveying applications when material changes are frequent. The unit easily disassembles with removal of one quick-release clamp for material changes and cleaning.
Standard Features - All 2406 Vacuum Receiver Models
The Series3 Model 2406 A and B receivers’ standard material of construction is spun aluminum. A low-voltage cable system with quick-connect plugs allows the receivers to be connected to the Microprocessor Controller (MPC) or the PLC Central Controller without tools. In addition, low-voltage wiring generally does not require an electrician or conduit, allowing for a less expensive electrical installation.
- 80 to 100 PSI dry compressed air required for the main air control valve
- Maximum volume per draw is 1 pound, based on 35 pounds per cubic foot pellets
- Perforated aluminum filter standard
- Adjustable vacuum bleed off for precise draw time settings
|
Request Quote | Contact Rep
Spec Sheets require Adobe’s Acrobat Reader to view. If you are already logged in with your Premier Pneumatics account, you will automatically be redirected to the download page. If not, you will be asked to provide us with some basic information prior to downloading.
|
 Series 2406 Vacuum Receiver Model A Features
Model 2406A-MPC Part number 5186-1
PyrexTM sight glass with aluminum base directly mounts to throat of a machine.
- Includes adjustable proximity level sensor
- Includes solid state, low voltage controls mounted in a NEMA 4 control box, for use with a microprocessor controller
Model 2406A-PLC Part number 5186-3
PyrexTM sight glass with aluminum base directly mounts to throat of a machine.
- Includes adjustable proximity level sensor
- Includes receiver I/O Block
- All receiver connections use quick-connect plugs that are color coded for each device
- 24VDC operation voltage, NEMA 4
 Series 2406 Vacuum Receiver Model B Features
Model 2406B-MPC Part number 5186-2
Polypropylene check ball maintains a vacuum tight seal so unit can be mounted on a hopper to maintain a volume of material. A proximity or rotary-type level control is required to maintain hopper material level.
- Includes solid state, low voltage controls mounted in a NEMA 4 control box, for use with a microprocessor controller
Model 2406B-PLC Part number 5186-4
Polypropylene check ball maintains a vacuum tight seal so unit can be mounted on a hopper to maintain a volume of material. A proximity or rotary-type level control is required to maintain hopper material level.
- Includes receiver I/O Block
- All receiver connections use quick-connect plugs that are color coded for each device
- 24VDC operation voltage, NEMA 4
|
