2410/2415 Vacuum Sequencing Central Conveying Receivers
The 2410 and 2415 vacuum receivers are designed to handle powder, pellet, regrind, or granular materials. The modular designed receivers allow flexibility in the selection of material construction, power, filtration, and receiver inlet sections to meet your current pneumatic conveying application requirements as well as your future needs. Each section of the receiver is attached by quick-connect clamps to facilitate filter maintenance and receiver cleaning.
Series 2410/2415 Vacuum Receivers Materials of Construction
The vacuum receivers are available in either aluminum or 316 stainless steel construction. Components of different construction are interchangeable allowing receivers to be specified with stainless steel material contact areas only.
Central or Self Contained Vacuum Source
You can choose between a self contained vacuum source mounted in the receiver’s lid, or a central system vacuum blower. Central system units (2410 and 2415 Receivers) utililze a common vacuum blower package, and are primarily used on multiple-destination applications where larger conveying rates or long distances are required.
|
Request Quote | Contact Rep
Spec Sheets require Adobe’s Acrobat Reader to view. If you are already logged in with your Premier Pneumatics account, you will automatically be redirected to the download page. If not, you will be asked to provide us with some basic information prior to downloading.
|
2410 Vacuum Receiver Conveying Rates
Based on a distance of 15 m [50 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance and plant layout.
| 2410 Pellet Receiver |
2410 Powder Receiver |
| Up to 1,180 kg/hr [2,600 lb/hr] |
Up to 408 kg/hr [900 lb/hr] |
2410 Vacuum Receiver Mechanical Specifications
- Aluminum or stainless steel construction
- Volume capacity 10 dm3 [0.36 ft3]
- 254 mm [10 in] diameter housing
- Up to 50.8 mm [2 in] tangential inlet with stainless steel check valve assembly
- Stainless steel band clamps
- Integral air control valve with backside vent, dual acting air cylinder with solenoid control 24 VDC
- One-piece stainless steel 127 mm [5 in] discharge gate with white Neoprene seal
- Inductive proximity switch level-sensing system on discharge gate 24 VDC
- Automatic reverse jet cleaning 1.7 dm3 [.06 ft3] air reservoir; 6.9 bar max [100 psig]
2410 Vacuum Receiver Standard Filtration Options
- Perforated filter element for pellets
- 16 oz polyester cloth fi lter bag with snap-ring seal for powder, total 0.3716 m2 [4 ft2] filter area
 2415 Vacuum Receiver Conveying Rates
Based on a distance of 15 m [50 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance and plant layout.
| 2415 Pellet Receiver |
2415 Powder Receiver |
| Up to 2720 kg/hr [6000 lb/hr] |
Up to 1000 kg/hr [2200 lb/hr] |
2415 Vacuum Receiver Mechanical Specifications
- Aluminum or stainless steel construction
- Volume capacity 26 dm3 [0.92 ft3]
- 381 mm [15 in] diameter housing
- Up to 76.2 mm [3 in] tangential inlet with stainless steel check valve assembly
- Stainless steel band clamps
- Integral air control valve with backside vent, dual acting air cylinder with solenoid control 24 VDC
- One-piece stainless steel 127 mm [5 in] discharge gate with white Neoprene seal
- Inductive proximity switch level-sensing system on discharge gate 24 VDC
- Automatic reverse jet cleaning 1.8 dm3 [0.06 ft3] air reservoir; 6.9 bar max [100 psig]
2410 Vacuum Receiver Standard Filtration Options
- Perforated filter element for pellets
- 16 oz polyester cloth fi lter bag with snap-ring seal for powder, total 0.8361 m2 [9 ft2] filter area
|
